Wall-mounted sensor RGBW LED controller T4B - controller for colored RGBW LED strips, with a sensor wheel for controlling LED strips. The operating frequency of the remote control is 2,4GHz, the signals of this frequency can spread further and are less disturbed by obstacles such as wall partitions, etc.
Key features of the T4B Controller:
- It has a sensor wheel, which can be used to change the color of the lighting.
- Smooth light changing, dimming, switching on and off without any flickering.
- 1/2/3/4 Scene – 4 scene buttons, allowing you to save the desired light color.
- BRIGHT/SPEED - with the help of a button, you can control the light intensity or adjust the speed of changing programs.
- MODE - with the help of the button, you can choose from 10 already programmed different color changing programs.
- Built-in 2,4 GHz control frequency, which allows the signal to spread up to 30m.
- This wall controller can work with virtually all SKYDANCE controller-receivers.
- All buttons have integrated night lighting.
Connecting to other controllers-receivers if you want to use them as a remote control:
- We connect the LED power supply to the receivers and the controller T4B, respectively 12V or 24V, depending on the voltage of the LED strip you plan to use.
- We connect the LED strip.
- We connect everything to the network. If everything is connected correctly, the light should light up both on the controller and on the receiver you want to connect.
- Turn off the voltage, then turn it on and quickly touch the on/off switch of the controller 3 times with short presses. After the lights on the controller and receiver flash three times, the controller and receivers are connected.
- In order to delete all communications with the receivers, you need to: turn off the voltage, then turn it on and quickly touch the on/off switch of the controller 5 times. After the lights on the controller and receiver flash five times, the controller's memory will be erased.
Wall-mounted sensor RGBW LED controller T4B is universal, like other controllers in this series, they can work with practically all offered controllers, in addition, these controllers can work together with wireless remote controls.
Controllers-receivers that are suitable for connection with the T4B controller:
- Single Color and RGB/RGBW Color Bar Controls: V1, V2-L,V3, V3-L, V3-X, V4-L, V4-D, VP.