Wall sensor LED controller T16-1
One-color LED strip controller with touch switches for controlling one LED strip. The operating frequency of the controller is 2,4GHz, which allows signals to travel further and is less disturbed by obstacles such as walls, partitions, etc.
The main features of the T16-1 controller:
- DMX512 protocol controller
- Can also be used as a remote control unit with all SKYDANCE controllers
- Gentle light dimming, switching on and off without any flickering.
- The series includes devices that can control 1, 2, 3 or even 4 zones.
- Built-in 2,4 GHz control frequency, which allows the signal to spread up to 30m.
- Power button with light to see even at night.
Connecting to other controllers-receivers if you want to use them as a remote control:
- We connect the LED power supply to the receivers and controller T16-1, respectively 12V or 24V, depending on the voltage of the LED strip you plan to use.
- We connect the LED strip.
- We connect everything to the network. If everything is connected correctly, the light should light up both on the controller and on the receiver you want to connect.
- Turn off the voltage, then turn it on and quickly touch the on/off switch of the controller 3 times with short presses. After the lights on the controller and receiver flash three times, the controller and receivers are connected.
- In order to delete all communications with the receivers, you need to: turn off the voltage, then turn it on and quickly touch the on/off switch of the controller 5 times. After the lights on the controller and receiver flash five times, the controller's memory will be erased.
Wall-mounted rotary LED controller T16-1 is universal, like other controllers in this series, they can work with practically all the controllers offered, in addition, these controllers can work together with wireless remote controls.
Controllers-receivers that are suitable for connection with the T16-1 controller:
- Single Color, RGB, RGBW and RGB+CCT Controls: V1, V1-L, V2-L,V3, V3-L, V3-X, V4, V5.