Wall sensor LED controller T1-1
Single color LED strip controller with sensor strip for controlling up to four LED strips. The operating frequency of the remote control is 2,4GHz, the signals of this frequency can spread further and are less disturbed by obstacles such as wall partitions, etc.
The main features of the T1-1 controller:
- It has a sensor strip, which can be used to adjust the intensity of the lighting.
- Gentle light dimming, switching on and off without any flickering.
- Ability to control up to four bands directly from the controller, without additional receivers.
- Built-in 2,4 GHz control frequency, which allows the signal to spread up to 30m.
- This wall controller can work with virtually all SKYDANCE controller-receivers.
- Power button with light to see even at night.
Connecting to other controllers-receivers if you want to use them as a remote control:
- We connect the LED power supply to the receivers and controller T1-1, respectively 12V or 24V, depending on the voltage of the LED strip you plan to use.
- We connect the LED strip.
- We connect everything to the network. If everything is connected correctly, the light should light up both on the controller and on the receiver you want to connect.
- Turn off the voltage, then turn it on and quickly touch the on/off switch of the controller 3 times with short presses. After the lights on the controller and receiver flash three times, the controller and receivers are connected.
- In order to delete all communications with the receivers, you need to: turn off the voltage, then turn it on and quickly touch the on/off switch of the controller 5 times. After the lights on the controller and receiver flash five times, the controller's memory will be erased.
Wall-mounted rotary LED controller T1-1 is universal, like other controllers in this series, they can work with practically all the controllers offered, in addition, these controllers can work together with wireless remote controls.
Controllers-receivers that are suitable for connection with the T1-1 controller:
- Single color and RGB color bar control controls: V1, V2-L,V3, V3-L, V3-X, V4-L, V4-D, VP.