Sensor LED control dimmer
LED Touch-sensitive controller with ON/OFF and light adjustment function, intended for installation in LED profiles.
Controller Features:
- The sensor controller is intended for use only in indoor conditions and for small voltages of 12V.
- The total power of LED strips or LED lights that are connected to the controller cannot exceed the specified. (see characteristics)
- Installation of the controller must be done according to the instructions.
- The voltage must be switched off during installation. It is best if a specialist does it.
- Use only dry cloths for cleaning. Do not use any cleaners.
- The controller has memory. This means that after setting the correct luminous flux, the luminous flux will remain as it was last set after switching the light source off and on again.
Controller operation:
When everything is properly installed and connected to the mains, the blue indicator light should be on. This means that the controller is connected correctly.
Activation: In order for the controller to turn on the LED strip or lights connected to it, you only need to touch the button on the controller.
Shutdown: You also need to touch the eye of the controller to turn it off.
Dimerization: To dim (decrease or increase) the light flux, you need to touch and hold the LED controller for a few seconds.
Sensor LED controller dimmer - High-quality LED controller is perfect for under-cabinet lighting in the kitchen.