RGBW+WW LED Strip Controller V5
The constant voltage LED controller is designed for color RGB + LED strip with warm and cold diodes, otherwise called RGB+CCT. The operating frequency of the remote control is 2,4GHz, the signals of this frequency can spread further and are less disturbed by obstacles such as wall partitions, etc. The controller also has a Push-Dimm function, which means that the controller can be controlled not only with the remote control, but also with a normal bell-type (Push-Dim) switch.
Connecting to the remote control:
- We connect the LED power source, respectively 12V or 24V, depending on the voltage of the LED strip you plan to use.
- We connect the LED strip
- We connect everything to the network. If everything is connected correctly, the light marked "RUN" should start to glow blue.
- There is a small hole in the case marked "MATCH" and it contains a button. After pressing that button, the "RUN" light will flash, which means that the controller is ready to connect to the control panel.
- We press any button on the selected control panel. If the "RUN" light blinks again, it means that the remote has connected to the controller and the corresponding LED strip can now be controlled.
The RGBW LED strip controller V4 is universal, like other LED strip controllers in this series, they can work with practically all offered control panels, and these controllers can also be connected to wireless wall switches.
Remotes that are suitable for connection with the V5 controller:
- RGBW+WW Color Bar Control Panels: R17, R8-5, RT5, RT10, R23
- RGBW+WW Wall Controllers: T15, T15-1, T25, T25-1
- WiFi relay
