RGB/RGBW Control panel R9 - control panel for colored RGB or RGBW LED strips, with twenty-seven buttons for controlling one zone. The operating frequency of the remote control is 2,4GHz, the signals of this frequency can spread further and are less disturbed by obstacles such as wall partitions, etc.
Key features of the R9 remote control:
- It has twenty-seven buttons with which you can easily control the LED strip.
- The ability to tighten or brighten the lighting 10 levels.
- The ability to set the color of the lighting at the touch of a button. there are 10 different colored buttons for this.
- There are three standard color buttons to add or subtract the selected color: R - Red, G - Green, B - Blue, W - White.
- In order to extend the controller's battery life, the remote control is programmed so that if no action is performed for several seconds, the controller's touch wheel goes into sleep mode. In order to control the remote control with the touch wheel again after a while, you need to press any button on the remote control, so the touch wheel "wakes up" from sleep mode.
Connecting to the controller:
- We connect the LED power source, respectively 12V or 24V, depending on the voltage of the LED strip you plan to use.
- We connect the LED strip
- We connect everything to the network. If everything is connected correctly, the light marked "RUN" should start to glow blue.
- There is a small hole in the case marked "MATCH" and it contains a button. After pressing that button, the "RUN" light will flash, which means that the controller is ready to connect to the control panel.
- We press any button on the selected control panel. If the "RUN" light blinks again, it means that the remote has connected to the controller and the corresponding LED strip can now be controlled.
RGB/RGBW control panel R9 is universal, like other remote controls in this series, they can work with practically all offered controllers, in addition, these remote controls can work together with wireless wall switches.
Controllers that are suitable for connection with the R9 remote control:
- RGB color bar control controls: V3, V3-L, V3-X, V4-L, V4-D, VP.