External sensor LED controller T20-2
Externally mounted, battery powered, single color LED strip controller with touch switches for controlling two LED strips. The operating frequency of the controller is 2,4GHz, which allows signals to travel further and is less disturbed by obstacles such as walls, partitions, etc.
The main features of the T20-2 controller:
- External installation
- Powered by 2 x AAA batteries, no cables required
- Can be used as a remote control device with all SKYDANCE controllers
- Gentle light dimming, switching on and off without any flickering.
- In the series, devices that can be controlled 1, 2, 3 or even 4 zones
- Built-in 2,4 GHz control frequency, which allows the signal to spread up to 30m
- Power button with light to see even at night
Connecting to other controllers-receivers if you want to use them as a remote control:
- We connect the LED power supply to the receivers and controller T20-2, respectively 12V or 24V, depending on the voltage of the LED strip you plan to use.
- We connect the LED strip.
- We connect everything to the network. If everything is connected correctly, the light should light up both on the controller and on the receiver you want to connect.
- Turn off the voltage, then turn it on and quickly touch the on/off switch of the controller 3 times with short presses. After the lights on the controller and receiver flash three times, the controller and receivers are connected.
- In order to delete all communications with the receivers, you need to: turn off the voltage, then turn it on and quickly touch the on/off switch of the controller 5 times. After the lights on the controller and receiver flash five times, the controller's memory will be erased.
External touch LED controller T20-2 is universal, like other controllers in this series, they can work with practically all offered controllers, in addition, these controllers can work together with wireless remote controls.
Controllers-receivers that are suitable for connection with the T20-2 controller:
- Single Color, RGB, RGBW and RGB+CCT Controls: V1, V1-L, V2-L,V3, V3-L, V3-X, V4, V5.