4-zone control panel RS1 - one-color LED strip control panel with a touch wheel for controlling four zones. The operating frequency of the remote control is 2,4GHz, the signals of this frequency can spread further and are less disturbed by obstacles such as wall partitions, etc.
The main features of the remote control:
- It has a sensor dial that can be used to adjust the lighting level (256 levels)
- Ability to set 3 lighting levels and save them. To save the corresponding level, you only need to hold down the corresponding "Scene" button marked with the save icon for 2 seconds.
- It is possible to control four groups of controls with one remote control.
- In order to extend the controller's battery life, the remote control is programmed so that if no action is performed for several seconds, the controller's touch wheel goes into sleep mode. In order to control the remote control with the touch wheel again after a while, you need to press any button on the remote control, so the touch wheel "wakes up" from sleep mode.
Connecting to the controller:
- We connect the LED power source, respectively 12V or 24V, depending on the voltage of the LED strip you plan to use.
- We connect the LED strip
- We connect everything to the network. If everything is connected correctly, the light marked "RUN" should start to glow blue.
- There is a small hole in the case marked "MATCH" and it contains a button. After pressing that button, the "RUN" light will flash, which means that the controller is ready to connect to the control panel.
- We press any button on the selected control panel. If the "RUN" light blinks again, it means that the remote has connected to the controller and the corresponding LED strip can now be controlled.
The 4-zone remote control RS1 is universal, like other remote controls in this series, they can work with practically all the controllers offered, in addition, these remote controls can work together with wireless wall switches.
Controllers that are suitable for connection with the RS1 remote control:
- Single Color Controls: V1, V3, V4-D, V4, V4-L, VP, V2, V2-L.
- RGB color bar control controls: V3, V3-L, V3-X, V4-L, V4-D, VP.
