4-zone touch RGBW LED controller T14B
Color RGBW LED strip controller with touch wheel for controlling four LED strip zones. The operating frequency of the controller is 2,4GHz, which allows signals to travel further and is less disturbed by obstacles such as walls, partitions, etc.
Key features of the T14 controller:
- It has a sensor wheel, which can be used to change the color of the lighting.
- Smooth light changing, dimming, switching on and off without any flickering.
- R, G , B, W - Buttons are for activating a certain color, and holding these buttons for a long time can adjust the amount of a certain color (dimerize that color).
- 1/2/3/4 ZONE - 4 zone buttons that allow you to control up to 4 different LED strip zones separately.
- BRIGHT/SPEED - with the help of a button, you can control the light intensity or adjust the speed of changing programs.
- MODE - with the help of the button, you can choose from 10 already programmed different color changing programs.
- Built-in 2,4 GHz control frequency, which allows the signal to spread up to 30m.
- This wall controller can work with virtually all SKYDANCE controller-receivers.
- All buttons have integrated night lighting.
- Can work with DMX512 light control devices.
Connecting to other controllers-receivers if you want to use them as a remote control:
- We connect the LED power supply to the receivers and the controller T14B, respectively 12V or 24V, depending on the voltage of the LED strip you plan to use.
- We connect the LED strip.
- We connect everything to the network. If everything is connected correctly, the light should light up both on the controller and on the receiver you want to connect.
- Turn off the voltage, then turn it on and quickly touch the on/off switch of the controller 3 times with short presses. After the lights on the controller and receiver flash three times, the controller and receivers are connected.
- In order to delete all communications with the receivers, you need to: turn off the voltage, then turn it on and quickly touch the on/off switch of the controller 5 times. After the lights on the controller and receiver flash five times, the controller's memory will be erased.
The 4-zone touch RGBW LED controller T14B is universal, like other controllers in this series, they can work with practically all the controllers offered, in addition, these controllers can work together with wireless remote controls.
Controllers-receivers that are suitable for connection with the T14B controller:
- Single Color and RGB/RGBW Color Bar Controls: V1, V2-L,V3, V3-L, V3-X, V4-L, V4-D, VP.