4-zone sensor LED controller T11-1
Single color LED strip controller with sensor strip for controlling four LED strip zones. The operating frequency of the controller is 2,4GHz, which allows signals to travel further and is less disturbed by obstacles such as walls, partitions, etc.
The main features of the T11-1 controller:
- It has a sensor strip that can be used to change the lighting level.
- Smooth light changing, dimming, switching on and off without any flickering.
- 1/2/3/4 ZONE - 4 zone buttons that allow you to control up to 4 different LED strip zones separately.
- 1/2/3 SCENE - with the help of the button, you can save the desired lighting level.
- Built-in 2,4 GHz control frequency, which allows the signal to spread up to 30m.
- This wall controller can work with virtually all SKYDANCE controller-receivers.
- All buttons have integrated night lighting.
- Can work with DMX512 light control devices.
Connecting to other controllers-receivers if you want to use them as a remote control:
- We connect the LED power supply to the receivers and controller T11-1, respectively 12V or 24V, depending on the voltage of the LED strip you plan to use.
- We connect the LED strip.
- We connect everything to the network. If everything is connected correctly, the light should light up both on the controller and on the receiver you want to connect.
- Turn off the voltage, then turn it on and quickly touch the on/off switch of the controller 3 times with short presses. After the lights on the controller and receiver flash three times, the controller and receivers are connected.
- In order to delete all communications with the receivers, you need to: turn off the voltage, then turn it on and quickly touch the on/off switch of the controller 5 times. After the lights on the controller and receiver flash five times, the controller's memory will be erased.
The 4-zone sensor LED controller T11-1 is universal, like other controllers in this series, they can work with practically all the offered controllers, in addition, these controllers can work together with wireless remote controls.
Controllers-receivers that are suitable for connection with the T11-1 controller:
- Single Color and RGB/RGBW Color Bar Controls: V1, V2-L,V3, V3-L, V3-X, V4-L, V4-D, VP.