230V Controller TRIAC + Push DIM S1-B
The 1A 100V-240V voltage controller is designed to turn the device on/off or control the voltage (dimming), and also has a PUSH SWITCH connector. The operating frequency of the controller is 2,4GHz, which allows signals to travel further and is less disturbed by obstacles such as walls, partitions, etc.
Key features of the S1-B controller:
- Maximum load 1A
- Installed in a standard electrical installation box.
- Power supply 100-240V
- Can be used with all SKYDANCE remotes.
- ON/OFF function.
- TRIAC dimming function
- Suitable for use with any devices controlled by 230V voltage.
- Built-in 2,4 GHz control frequency, which allows the signal to spread up to 30m
Connecting to remotes:
- We connect the power supply to the receivers and controller S1-B.
- We connect the device.
- We connect everything to the network. If everything is connected correctly, the light should light up both on the controller and on the receiver you want to connect.
- Turn off the voltage, then turn it on and quickly touch the on/off switch of the controller 3 times with short presses. After the lights on the controller and receiver flash three times, the controller and receivers are connected.
- In order to delete all communications with the receivers, you need to: turn off the voltage, then turn it on and quickly touch the on/off switch of the controller 5 times. After the lights on the controller and receiver flash five times, the controller's memory will be erased.
230V Controller TRIAC + Push DIM S1-B is universal, like other controllers in this series, they can work with practically all offered remote controls.